5 Tips for Installing Floor Warming on Shower Floors

The comfort of heated floors can bring a touch of luxury to any room in the home. That luxury can now extend right into tiled floors in the shower.Can you put a heated floor in a shower?The simple answer is yes, it is possible to heat the shower floor.By using a dedicated heating cable and ensuring the shower area has completed required...

The comfort of heated floors can bring a touch of luxury to any room in the home. That luxury can now extend right into tiled floors in the shower.

Can you put a heated floor in a shower?

The simple answer is yes, it is possible to heat the shower floor.

By using a dedicated heating cable and ensuring the shower area has completed required waterproofing steps the shower floor can be warmed, just like any other tiled floor. Installers should heed specific details around curbs, drains, and corners.

► For comprehensive installation requirements and instructions, please refer to our DITRA Installation Handbook,or watch our video below on how best to install a heated floor in your shower. .

Here are some guidelines to ensure your renovation is a success.

Heating Cables

Schluter recommends using a dedicated heating cable inside the shower area and a separate cable for the bathroom floor area.

Waterproofing

After the curb is installed, Schluter-KERDI waterproofing membrane is installed over the DITRA-HEAT system on the shower base, and all other waterproofing steps must be completed.

Temperature Sensor

The floor temperature sensor should not be installed inside the shower area, rather on the bathroom floor. This will prevent the thermostat from turning off the bathroom floor warming cable prematurely when the shower is in use.

Shower Curb

Heating cables cannot be installed under or through the curb as this couldcause overheating and damage the heating cable and the curb. The cable must be installed over the curb in a routed section.A hot glue gun or similar can secure the cable into the routed section and the section is thenfilled with thin-set mortar. Schluter-KERDI mustcthen be installed over the routed section after it is filled with thin-set mortar.

Local Building codes

Prior to installation, approval of electric floor warming in shower applications must be verified by the local building code official or authority having jurisdiction.authority having jurisdiction.

Source: www.schluter.com